RideIQ Performance

DATA LOG INSTRUCTIONS

HOW TO RECORD A DATA LOG

Choose your device below. Save the original file even if you also export a CSV for Excel.

PV4: record on your phonePV3: record on the deviceWinPEP 8: export a spreadsheet file

Before you record

Ride normally and safely. Note the bike, installed tune if known, fuel, date, and what happened during the ride. Do not try a hard pull or unsafe road test just to collect data.

STEP BY STEP

PV4: record on your phone

Use the Dynojet Power Vision 4 app with your PV4 connected to the motorcycle.

  1. 01Open the Power Vision 4 app and connect to your PV4.
  2. 02Tap Datalog, then Start before the part of the ride you want reviewed.
  3. 03Tap Stop when you are finished. The app saves the log.
  4. 04Tap Share for that log and save the original file to your phone or send it to your computer. Keep an unchanged copy.
Dynojet PV4 guide: Logging Data

STEP BY STEP

PV3: record on the device

The Power Vision 3 records the log on the device while it is connected to your motorcycle.

  1. 01With the PV3 connected, press the Log button to begin. A red banner across the top shows that logging is active.
  2. 02Press Log again to stop and save the log.
  3. 03Connect the PV3 to your computer with its USB cable. It should enter USB Mode automatically; you can also choose USB Mode from the main menu.
  4. 04Copy the original log file to your computer and keep that copy unchanged.
Dynojet PV3 guide: Logging Data and USB Mode

STEP BY STEP

WinPEP 8: export a spreadsheet file

WinPEP 8 Data Center exports a CSV file. You can open that CSV in Excel; you do not need to create an XLSX file.

  1. 01Open your log or run file in WinPEP 8 Data Center and select it in File View. Export stays unavailable until a file is selected.
  2. 02On the Home ribbon, choose Export.
  3. 03Choose the Time Export tab and select the sample interval for the CSV. Use Preview to check the rows and columns.
  4. 04Choose Save, select a folder, and save the CSV. Keep the original log file too.
Dynojet WinPEP 8 Data Center export help

SENDING YOUR FILE

Keep the original log. CSV is optional.

When RideIQ report ordering opens, sign in with ChatGPT, choose your motorcycle and report, then upload the original log. Add the CSV if you exported one. Tell us which tune was installed and what you want us to investigate. If WinPEP 8 export gives you trouble, send the original log and we can help convert it after upload.

Secure uploads and report requests are not open yet. This page helps you prepare without implying a file has been sent.

MY RIDEIQ / SIGN IN